System authentication

2020-03-17

    System certification refers to the third-party evaluation of an enterprise's management system or products by a third-party organization. The institution must be independent and impartial.
    The international standardization activity of system certification started in the field of electronics at first. In 1906, the International Electrotechnical Commission (IEC), the earliest international standardization organization in the world, was established. Work in other technical fields was originally undertaken by the International Federation of the national standardization associations (ISA), which was founded in 1926, with emphasis on mechanical engineering. Isa's work was terminated in 1942 as a result of World War II. In 1946, representatives from 25 countries met in London and decided to establish a new international organization with the purpose of promoting international cooperation and the unification of industrial standards. As a result, ISO, a new organization of system certification, was officially established on February 23, 1947, with its headquarters in Geneva, Switzerland. ISO issued the first standard in 1951, the standard reference temperature for industrial length measurement.

ISO9001 certification
    ISO9001 is an international standard of quality management system formulated by the international organization for Standardization (ISO). With the development of economy and the continuous improvement of people's living standards, product quality has become the focus of social attention, and ISO is more and more recognized and accepted by the world's public. Nowadays, obtaining ISO9001 certification has become the basic condition for enterprises to win the trust of customers and consumers.

ISO14000 certification
    ISO14000 is an international standard of environmental management system formulated by the international organization for Standardization (ISO). ISO14000 certification has become an important "weapon" to break the green trade barrier and enter the international market.

OHSMS18001 certification
    It is a series of standards for occupational safety and health management system adopted by the state and organizations. According to the international requirements and implementation of occupational safety and health management system standards, OHSMS 18000 has become the most widely adopted and authoritative standard.

HACCP authentication
    It is a kind of certification applicable to the food industry. It is an effective preventive measure and monitoring means for key control points in the food production process to minimize the risk factors. China's export of food is facing more and more strict standards and regulations. It is a food safety control system, it is not an independent system. HACCP must be established on the basis of food safety project to make it run. For example: good practice (GMP), standard practice (SOP) and Health Standard Practice (SSOP). Since HACCP is based on many operation specifications, a relatively complete quality assurance system has been formed. As the most effective control system of food source disease, HACCP has been accepted by the state or society.

ISO27001 certification
    The code of practice for information security management (ISO / IEC27001), formerly known as the British BS7799 standard, was proposed by the British Standards Institute (BSI) in February 1995 and revised in May 1995. BSI revised the standard in 1999. BS7799 is divided into two parts: bs7799-1, information security management implementation rules bs7799-2, information security management system specification. The first part gives suggestions on information security management for the personnel responsible for starting, implementing or maintaining security in their organizations; the second part describes the requirements for establishing, implementing and documenting information security management system (ISMS), and specifies the requirements for implementing security control according to the needs of independent organizations.
AS9100 authentication

    The emergence of AS9100 standard comes from the common needs of organizations and their suppliers in the aerospace industry. The globalization of aerospace industry and the differences of regional / national requirements and expectations make organizations and their suppliers in the aerospace industry face severe challenges. On the one hand, an organization has to face many suppliers, The organization is faced with the challenge of how to ensure the procurement of high-quality products from suppliers all over the world and at all levels of the supply chain and realize the standardization of procurement requirements. On the other hand, a supplier will also face a large number of customers. The supplier should not only deliver products with different quality expectations and requirements to different customers, but also deal with frequent second-party audits with different customer requirements.
    In July 2004, the subcontract production project of aviation parts of Shanghai aircraft manufacturing plant of China was awarded AS9100 quality management system certification by BVQI, the French international inspection bureau. Shanghai aircraft manufacturing plant is the first company in China that Boeing has passed AS9100 third-party certification among many suppliers. The delivery rate of b737-ng flat tail of the plant has increased from 10 to 13 per month, Hafei aviation was awarded the gold medal supplier by Boeing aircraft company. In October 2004, Hafei aviation obtained the AS9100 quality system certification issued by BVQI, which laid a solid foundation for further opening up the international aviation product subcontract market. The quality management system of the international cooperation project of Xifei passed the international third-party quality system     certification in September 2004, which further expanded its cooperation with Boeing, BAE, Air France, Conditions provided by international cooperation projects of various aviation enterprises in the world, such as Alitalia.

[Back]