Model
|
CIY-WW24S.RGB
|
CIY-WW36S.RGB
|
CIY-WW24S.XX
|
CIY-WW36S.XX
|
Electric parameter
|
Max.Power
|
24W
|
36W
|
24W
|
36W
|
Input voltage
|
AC90~265V/ DC24V
|
Power efficiency
|
>85%
|
Environment parameter
|
Environment humidity
|
0~85%RH
|
Storage Temp.
|
-40Degree Celsius~+80Degree Celsius
|
Operating Temp.
|
-20 Degree Celsius~+40Degree Celsius
|
Structure
|
Dimensions
|
L335mm*H147mm*W200mm
|
Weight
|
4.3kgs plus/minus5% 400*150*270mm
|
Material
|
Aluminum die-cast housing,Tempered Glass
|
Housing color
|
Silvery grey/Black
|
Operating IP grade
|
IP65
|
Optical parameter
|
LED brand
|
Epistar chip/EPILEDS chip LED
|
Light source
|
8R/8G/8B
|
12R/12G/12B
|
24pcs single color LEDs
|
36pcs single color LEDs
|
R,G,B,Y,W etc. for choice
|
Lens angle
|
15degree
|
30degree
|
45degree
|
60degree
|
Projection distance
|
15M
|
12M
|
8M
|
5M
|
CCT
|
warm white(2700~3500K)/pure white(5000~6500K)/cool white(6500~9000K)
|
Wave length
|
Red (620 - 630nm), green (520 - 525nm), blue (465 - 470nm), amber(590 - 595nm)
|
Controller
|
DMX512 controller/ On-Off controller
|
Control signal
|
DMX512
|
Operation Menu
|
Digital display, 3 LED digital tubes with A B button to choose menu function
|
DMX Channels
|
3/7CH
|
Control Mode
|
DMX512,Master-slave,Auto,Sound
|
Dimmer
|
0 ~ 100% linearly adjustable
|
Strobe
|
0-20 t/s
|
Maximum ambient temperature
|
40 degree Celsius
|
Maximum lamp temperature
|
60 degree Celsius
|
Working Mode of CIY LED Wall Washer: (OEM/ODM: Available)
1).Independant Mode:Choose the built-in programs via the buttons on the end cover.
a).Built-in 16 programs optional
b).1-9 class gray degree dimmer
2).Master/Slave Mode: Auto online and Synchro working.
Set any fixture's DMX address of master as built-in DMX mode, others are set as slave(address can be anyone except
DMX mode),change DMX mode on 1st wall washer ,all the lights will work synchronously.
Set DMX mode from P11 to SU9,other slave ones can not be DMX mode , only can be numbers from 001 to 512
3).DMX Mode: International standard DMX512 signal (IP65 connector).
a. Support the international standard DMX512 signal
b. DMX 3/7 channels available
c. DMX256 class gray degree dimmer
d. DMX programmable
• DMX controller and DMX signal amplifier max connection qty
DMX controller control max qty
|
DMX signal amplifier max qty
|
170 sets, the distance max 60m need amplifier
|
30 sets, the distance max 50m need another amplifier
|
•Distance between DMX and wall washer, and between two pcs wall washers not over 3m
l Connection Ports
One power supply input terminal, 3-pin female connector
One standard DMX signal input terminal, 3-pin male connector
One standard DMX signal output terminal, 3-pin female connector
l Our Pre-sale Services & After-sale Services.
1. Sample acceptable
2. OEM & ODM available
3. Reply in 24 hours
4. Provide professional product pictures
5. Repair, replace or return for quality problem
l Package & delivery terms:
Delivery Detail:
|
Sample and small order will be delivered within 3 days.
|
Size
|
335*147*200mm
|
Warranty
|
2years
|
Small inner box
|
400*150*270mm
|
Packaging qty
|
1PCS
|
Master Packaging box
|
480*415*290mm
|
Packaging Qty
|
3PCS
|
Net Weight
|
3.5KG/pc
|
Gross Weight
|
13.95KG/CTN
|
l Attention:
1. Please consider about " the working condition", the lamp can not be put in water for long time
2. RGB color DMX wall washer , all packed DMX address 001,just change master DMX program as you wish, or change the SD card DMX controller , not change DMX address.
3. Please make sure you have done the waterproof to the tail plug well.
4. When many single washer lights connected together, the connections please refer to the connection diagram.
5. The connection cable between two controllers, or between console and signal amplifiers. It can't exceed 3m; The distance between the first signals amplifier or console and the last washer light can't exceed 100m.
(Indoor and outdoor use)
Warning
1. Please do not connect the power when the lights are in package
2. Please do not connect the power supply before installation, and ensure the device is completely connected into the ground
3. Please replace any cracked protective cover;
4. Please attention to fire prevention, electricity and vibration;
5. Please read the instructions carefully before installation, and keep it for future reference.
l Attention
1. Corrosive or solubility chemicals will damage of the protective shell of lights;
2. The working temperature is -20 degree Celsius~40degree Celsius,and humidity is 0~85%. The lifetime will be adversely affected when beyond this scope. Storage temperature:-35~70degree Celsius;
3. Please advise that we are not responsible for the effect when the components not from CIY LED adopted.
l Instruction for installation
1. Please make sure there is no short circuit before turn on the power, otherwise the parts of the device would be burn out.
2. Around the lamp should fill with some gravel or sand when installation, it is better for the heat rink and drainage. And make sure there is no corrosive, inflammability and explosive material around.
Note: A. Make sure the power is be turned off while installation or dismounting.
B. Please replace with new lamp when the lamp body is defected.
!Problems and solutions:
1. If the light cannot light up, please check whether it connects with power supply well and whether the switch is on.
2. If the light turns on and off frequently, please check whether the connection between power and lamp is fixed enough.
Note: Please contact professionals in case of above solutions do not work; please try to contact professionals instead of open the light at once.
Pls contact manufacturer for related information like maintaince or the environment request, etc. If there is any change in the future, sorry that we will not inform.
If you have any question about the specification, please contact professionals or manufacture.
|