Catalog

whats is IP rank and IK grade

Date：2019-03-04

The IP system is an internationally recognised method to indicate the degree of protection against the ingress of dust, solid objects and moisture into an enclosure. The letters "IP" are followed by two numerals.

The IP rating has been in use in Europe and other countries outside of North America for many years, and has just recently been added to the Canadian Electrical Code (for hazardous locations). They are similar in intent to the NEMA ratings but there is no direct relationship. These ratings are widely used on portions of enclosures and components, as well as complete enclosures.In North America, the common practice has been to use NEMA enclosure ratings for both water and dust resistance. As the name suggests, these standards were originally developed and published by the National Electrical Manufacturer’s Association (NEMA) and have been adopted by UL, CSA and other standards bodies in North America. International Standards use the IEC IP ratings instead of the NEMA ratings.

First Numeral

Protection of persons against contact with or approach to live parts and against contact with moving parts, other than smooth rotating shafts and the like, inside the enclosure and protection of the equipment against ingress of solid foreign bodies in accordance with IEC 60598-1:2003.

Degrees of protection  against solid objects
IP0X  Non-protected
IP1X 50mm diameter and greater
IP2X 12.55mm diameter and greater
IP3X 2.5mm diameter and greater
IP4X 1.0mm diameter and greater
IP5X Dust-protected
IP6X Dust-tight
Degrees of protection  against water
IPX0  Non-protected
IPX1  IPX1 Vertically falling water drops
IPX2  IPX2 Vertically falling water drops with enclosure tilted
IPX3 IPX3 Spraying water
IPX4 IPX4 Splashing water
IPX5 IPX5 Water jets
IPX6 IPX6 Powerful water jets
IPX7 IPX7 Temporary immersion
IPX8 IPX8 Continuous immersion

0 Not protected

1 Protected against solid objects 50 mm in diameter or greater.
A large surface of the body, such as a hand (no protection against deliberate access). 

2 Protected against solid objects 12 mm in diameter or greater.
Fingers or similar objects not exceeding 80mm in length.

3 Protected against solid objects 2.5 mm in diameter or greater.
Tools, wires, etc., of diameter or thickness greater than 2.5 mm. 

4 Protected against solid objects 1mm in diameter or greater.
Wires or other similar solid material of thickness greater than 1mm in diameter. 

5 Dust protected.
Dust does not enter in sufficient quantity to interfere with satisfactory operation of equipment. 

6 Dust tight.
No ingress of dust

Second Numeral

The second numeral indicates the degree of protection against the ingress moisture as defined in IEC 60598-1:2003.

0 Not protected

1 Protected against dripping water.
Dripping water (vertically falling drops) shall have no harmful effect. 

2 Protected against dripping water when tilted up to 15º
Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15º from 
its normal position.

3 Protected against spraying water.
Water falling as a spray at any angle up to 60º from the vertical shall have no harmful effect. 

4 Protected against splashing water.
Water splashing against the enclosure from any direction shall have no harmful effect.

5 Protected against water jets.
Water projected by a nozzle against enclosure from any direction shall have no harmful effects. 

6 Protected against heavy seas.
Water from heavy seas or projected in powerful water jets shall not enter the enclosure in harmful quantities.

7 Protected against the effects of temporary immersion.
Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under 
defined conditions of pressure and time. 

8 Protected against continuous immersion.
The equipment is suitable for continuous submersion in water under conditions which shall be specified 
by the manufacturer. 

Note: Normally, this will mean that the equipment is hermetically sealed. However, with certain types of equipment, it can mean that water can enter but only in such a manner that produces no harmful effects.


Impact Protection (IK) Rating

IK rate IK 00 IK 01 IK 02 IK 03 IK 04 IK 05 IK 06 IK 07 IK 08 IK 09 IK 10
Energy(J) -- 0.15 0.2 0.35 0.5 0.7 1 2 5 10 20
mass and height
 of the striking piece 		-- 0.2KG  
70 mm 		0.2KG  
100 mm 		0.2KG  
175 mm 		0.2KG 
 250 mm 		0.2KG 
 350 mm 		0.5KG  
200 mm 		0.5KG  
400 mm 		1.7KG  
295 mm 		5KG 
  200 mm 		5KG 
  400 mm
Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts in accordance with IEC 62262:2002 and IEC 60068-2-75:1997. 

IK00 Not protected 

IK01 Protected against 0.14 joules impact.
Equivalent to impact of 0.25 kg mass dropped from 56 mm above impacted surface.

IK02 Protected against 0.2 joules impact.
Equivalent to impact of 0.25 kg mass dropped from 80 mm above impacted surface. 

IK03 Protected against 0.35 joules impact.
Equivalent to impact of 0.25 kg mass dropped from 140 mm above impacted surface. 

IK04 Protected against 0.5 joules impact.
Equivalent to impact of 0.25 kg mass dropped from 200 mm above impacted surface. 

IK05 Protected against 0.7 joules impact.
Equivalent to impact of 0.25 kg mass dropped from 280 mm above impacted surface.

IK06 Protected against 1 joules impact.
Equivalent to impact of 0.25 kg mass dropped from 400 mm above impacted surface. 

IK07 Protected against 2 joules impact.
Equivalent to impact of 0.5 kg mass dropped from 400 mm above impacted surface. 

IK08 Protected against 5 joules impact.
Equivalent to impact of 1.7 kg mass dropped from 300 mm above impacted surface. 

IK09 Protected against 10 joules impact.
Equivalent to impact of 5 kg mass dropped from 200 mm above impacted surface. 

IK10 Protected against 20 joules impact.
Equivalent to impact of 5 kg mass dropped from 400 mm above impacted surface. 

    Contact us
    • CIY LED LIMITED
    Add:
    Building A1,Huafengzhenbao lndustrial Park,Beihuan Road, Shiyan Town, Bao'an District,Shenzhen,China
     



    Zip code:518108
    Tel: +86 755 33101037
    Email:info@ciy-led.com

Copyright©2014 CIY LED LIMITED All Rights Reserved.