中文
EN
Home > News > Buy a powerful magnet is a door technology, be careful to fall into the low price trap
Buy a powerful magnet is a door technology, be careful to fall into the low price trap
The friend of a lot of manufacturer reflects buy strong magnet, but because of the price and cause a series of problems appear.
Beware of these low - price traps when buying dear friends powerful magnets.
Material problem: steal material, the so-called one cent one cent goods.
For example, many low-end manufacturers and workshops use materials below N30 for small profits, posing as N35.
Because the customer has no strong magnet detection equipment and professional, but also to meet the procurement price advantage, resulting in the final use and research and development of products failure.
It not only consumes the cost of samples, but also wastes related resources such as hardware and plastic parts.
It also wastes time and makes the product unsafe.
Tolerance problem: due to the low price, the tolerance of the product during production is too large, which completely exceeds the expected specification.
Other manufacturers make magnets with negative tolerances only.
This causes problems with the magnet, whether it is too large or too small, to be used.
Temperature resistance: magnets cannot withstand the application problem, and not only are they made of different materials, but magnets without special treatment cannot reach the high temperatures produced when the machine is running.
Its products burst in smelting, damaging the machine.
Manufacturer problem: not regular manufacturer has a lot of loopholes.
Without a guarantee of stable supply of goods, the delivery date of products may be delayed again and again. In addition to good partners in transportation or special freight cars, there will be a great loss of time on the way, which directly affects the production cycle of factory products.
Attitude problem: general price advantage above, more or less occupied.
Moreover, the service attitude is extremely poor. The customer service is not online, the telephone is disconnected, the website information is little, there is no official website, and the etiquette is poor.
The kind of love to buy not to buy, love to sell not to sell, mutual influence greatly hit the customer's mood.
So buying powerful magnets has been a procurement headache, and these traps take advantage of the price advantage to the detriment of others.
So the general price evaluation is relatively safe between big factories, to choose a professional manufacturer like cariqi magnet factory, in all aspects of details, quotation, sample list, order, contract and other details, to ensure the safety of the transaction at the same time, improve the system, to prevent any problems.
Shenzhen jinmenghui magnetic technology co., LTD. Quality assurance, price concessions, good delivery time, good service attitude, suitable for the major factory small batch special magnet custom, and large quantities of regular products magnet production.
Welcome new and old customers to consult!
Beware of these low - price traps when buying dear friends powerful magnets.
Material problem: steal material, the so-called one cent one cent goods.
For example, many low-end manufacturers and workshops use materials below N30 for small profits, posing as N35.
Because the customer has no strong magnet detection equipment and professional, but also to meet the procurement price advantage, resulting in the final use and research and development of products failure.
It not only consumes the cost of samples, but also wastes related resources such as hardware and plastic parts.
It also wastes time and makes the product unsafe.
Tolerance problem: due to the low price, the tolerance of the product during production is too large, which completely exceeds the expected specification.
Other manufacturers make magnets with negative tolerances only.
This causes problems with the magnet, whether it is too large or too small, to be used.
Temperature resistance: magnets cannot withstand the application problem, and not only are they made of different materials, but magnets without special treatment cannot reach the high temperatures produced when the machine is running.
Its products burst in smelting, damaging the machine.
Manufacturer problem: not regular manufacturer has a lot of loopholes.
Without a guarantee of stable supply of goods, the delivery date of products may be delayed again and again. In addition to good partners in transportation or special freight cars, there will be a great loss of time on the way, which directly affects the production cycle of factory products.
Attitude problem: general price advantage above, more or less occupied.
Moreover, the service attitude is extremely poor. The customer service is not online, the telephone is disconnected, the website information is little, there is no official website, and the etiquette is poor.
The kind of love to buy not to buy, love to sell not to sell, mutual influence greatly hit the customer's mood.
So buying powerful magnets has been a procurement headache, and these traps take advantage of the price advantage to the detriment of others.
So the general price evaluation is relatively safe between big factories, to choose a professional manufacturer like cariqi magnet factory, in all aspects of details, quotation, sample list, order, contract and other details, to ensure the safety of the transaction at the same time, improve the system, to prevent any problems.
Shenzhen jinmenghui magnetic technology co., LTD. Quality assurance, price concessions, good delivery time, good service attitude, suitable for the major factory small batch special magnet custom, and large quantities of regular products magnet production.
Welcome new and old customers to consult!
