Samsung LCD ultra narrow edge splicing wall blind spot
At present, large screen LCD display products in the field of stitching is popular, while Samsung can be regarded as a leading brand in the industry (from P N P I). LCD splicing screen can be used as a monitor alone, and can be spliced into large screen. According to the use of different requirements, to achieve variable size, variable small screen function. I believe most users of Samsung's new 7.3mm ultra narrow splicing units are not unfamiliar, but when it comes to ultra narrow side wall 7.3mm and 700CD (using the same skill or item time interval) with /m2 450cd/m2 (maybe) may be divided, most people will be confused (ambiguous). It is the understanding of the surface phenomenon caused by the majority of users in the selection of products only pay attention to compliance (f case h) 7.3mm ultra narrow side, and to show the effect of (Xi, O Gu I have a decisive impact on the brightness problem) (W n t) is negligible, the formation of blind (blind purchase spot). Then the Samsung 7.3mm ultra narrow LCD wall two products application (y ng y ng. O) what's the difference? The following small presentation (Introduction) for your reference.
Currently, Samsung LCD wall of two products LTI460AA04 (700cd/m2) and LTI460AA05 (450 cd/m2) belong to the ultra narrow side series mosaic, so in the main application (y ng y o ng) direction of two products and no essential difference. Touch one machine is a set of advanced touch screen, motherboard, memory, hard disk, graphics card and other electronic components, and the working principle of the same traditional PC machine. However, due to different application environment for large screen brightness requirements are different, so that the two products in the specific application of a slight difference.
Generally speaking, people's eyes to the brightness of the tolerance is limited, if in a small space the poor light, if brightness is 700cd/m2, the human eye is likely to burn (maybe); however, if in bright light the outdoor space, such as square, street, the brightness of the display screen if at 450 cd/m2. Then the image will be blurred in people. Therefore, the author suggests that users in the purchase of products should be based on the actual application environment of their own (Hu N J ng), is more applicable in the light and space limited slightly worse places LTI460AA05, on the contrary, the vast space has become the preferred light LTI460AA04.
In addition, the Samsung ultra narrow LCD wall, the optimum working temperature (temperature) is at 39 degrees Celsius (c), and relative humidity (humidity) of 90% controllable area reached the largest is the best working condition (Zhu, ng T, I). Touch touch machine using infrared touch screen is the use of X, Y direction of the infrared matrix densely located to detect and locate the user's touch. The brightness of the LCD splicing wall the higher the heat (Heat) more, if the heat is not in place, can cause the display effect, can also cause serious damage of liquid crystal display wall, life cycle (lifetime). Users should consider their own actual operation ability in the choice of products (n ng l).
Advice:
Should be based on their actual situation and application environment of rational users in the choice of liquid crystal splicing (refers to the narrow side of clear, calm and realistic thinking), considering the effect of brightness (consider), must not blind (the eyes see things, metaphor is unclear) chase (explanation: refers to the rapid positive seek escape things) trend, so as to avoid unnecessary losses (loss).
